MR.COLOR REGULAR SERIES

Mr. Color hobby paint is a paint that has long been regarded highly by modelers world wide, as a model paint that delivers an outstanding finish. There are a large number of colors and color types available, which are suitable for painting with most models.

Mr. Color provides a wider range of paint colors and finishes than Aqueous Hobby Color, and will dry to a smoother and harder finish.

The use of Mr. Thinner (sold separately) is required to thin Mr. Color paint, both to thin paint if desired, and also to clean paint brushes and airbrushes.

When applying Mr. Color paint, 1 to 2 coats are recommended when using paint brushes, and 2 to 3 coats if using an airbrush to spray paint.

If airbrushing Mr. Color paint, it should be thinned to a ratio of between 1 (Mr.Color) and 1 to 2 (Mr. Thinner), depending on the degree of paint viscosity required.

Gloss levels obtained using gloss Mr. Color hobby paints can be adjusted by using Flat Base - mix approximately 5 to 10% of C-30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.

• Use T114 Mr. Paint Remover to remove paint from a surface.
• Clean the tools with Mr. Color Thinner or Mr. Tool Cleaner.
• Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
• Mr. Hobby Topcoat and Super Clear can be applied over a coat of Mr. Color.
• Do a test paint before you apply paint on your model kit.